Sterling Battery To Battery Charger 12V-12V 50A

The Sterling Battery To Battery Charger 12V-12V 50A is able to charge battery banks from your engine battery. You can simply connect the charger to the engine battery and charge a battery bank whilst driving along (However please ensure your alternative can sustain it). You can use this charger to charge batteries up to 14.4/14.8V and banks upto around 150 Amp Hours. The charger will not let the primary charing system or battery sit below 13-14v i.e. within its limits and treats it as a higher priority which then feeds the battery bank you wish to charge as a lower priority.
Dimensions: 200 x 270 x 70 (L x W x D). Weight: 3.0KG

CTEK Multi XT 14000 24V Battery Charger

The Ctek MULTI XT 14000 battery charger is a powerful charger for 24V battery banks: in boats, vehicles and workshops. With built-in functions that constantly analyse the state of the battery - including temperature sensing - the CTEK MULTI XT 14000 battery charger ensures that batteries up to 300Ah (500Ah for maintenance) provide maximum performance at all times.
This charger can also be used as a power supply.

CTEK Multi XC 800 Battery Charger

The CTEK XC800 battery charger is designed for use with 6-volt batteries such as are used on motorcycles, lawnmowers and jet-skis. Like all models in the CTEK range, the XC 800 can be safely left connected indefinitely to ensure that a battery is in peak condition when it's needed. It is completely safe and can even be left out in the rain. It will charge batteries at a constant rate of 0.8 Amps per hour.

Alternator to Battery Charger remote control

Remote control of your sterling alternator to battery charger is now at your fingertips with a remote control which shows you battery voltages, alternator outputs etc. Parts include - Remote Panel, 10 Metres pre wired link cable, 2 X 200Amp pre wired shunts (The 2 shunts enable 2 X real currents to be measured and 1 X current calculated in the software. Accuracy + - 5%)